RTG crane is short for Rubber-tired container gantry crane, which is one of the main products of our company. At present, we have developed the products to standardized series products. For safety facilities, the rubber tired gantry crane is equipped with overload protection, diesel engine over speed rotection, water high temperature indicator and lower oil pressure indicator devices, and wind speed indicator, typhoon anchor device, emergency stop button and each mechanism limit switch and indicator, etc.
1. It can ensure that the box girder will not fall with the lifting winch equipped with dual braking system and other lifting parts with reliable design.
2. Can lift several steel pipes at once, carry out 0° traveling, 45°traversing, 90°traversing and in-place steering.
3. Reasonable structure, convenient operation, quick action, high reliability, low failure rate, which
4. Running Mode is Straight, transverse, fixed point, rotation.
5. The running gear uses the hydraulic suspension system.
6. Can realize automation control, and it's the first selection of port container yard handling machine.
Rubber tire container gantry crane is employed to handle containers, boats/yacht, large component at the loading/unloading places and container yard. This rubber tyred crane is fitted with multiple hooking point's spreaders to meet the needs of different lifting situations. The whole crane can carry out 360° steering with flexible movement.
Full hydraulic drive for crane traveling mechanism and lifting mechanism with Step less speed change. The long traveling use hydraulic closed circuit with good transmission efficiency, less fault. There are safety indicator and overlord limiter to ensure safety of operators and products. All operation are controlled by CAN-BUS control.
Lifting Capacity | T | 35 without spreader | |
Span | M | 30 | |
Lifting Height | M | 16 | |
Working Duty | A6 | ||
Container Size | 20f and 40f | ||
Speed | Hoisting | m/min | 0~10 |
Cross Traveling | 3.4~34 | ||
Crane Traveling | 2.9~29 | ||
Motor | Hoisting | Type/Kw | YZP280M-8/2×55 |
Cross Traveling | YZP180L-8/2×11 | ||
Crane Traveling | YZP160L-6/4×11 | ||
Weight | Trolley | t | 34 |
Total Weight | 215 | ||
Max. Wheel Load | KN | 295 | |
Steel Rail Recommended | P43 | ||
Power Supply | 3 Phase A.C. 50HZ 380V |
If you need a custom crane or need a complete crane solution or if you have any other questions, you can submit a message to us via the form below. We usually get in touch with you within 24 hours.