The LDY type metallurgical electric single-girder crane is a space transportation tool used in conjunction with the YHII electric hoist designed according to the JB/T1306-2008 standard and meeting the quality inspection office special [375] document. Intermittent and cyclical working methods, through the lifting hook or other device for the timely and rapid completion of the metallurgical production process required lifting of the transport heavy objects, is an important tool for modern industrial enterprises in metallurgy and casting sites to improve labor productivity.
1. can be also employed to lift non-molten metal and high temperature solid metal.
2. Other occasions for transporting molten non-metallic materials and lifting hot solid metal may also be used for reference
3. The bottom of main girder adopts special heat-insulation treatment with working environment﹣10℃~﹢60℃
4. The bottom of the crane beam is specially insulated.
5. Applicable to work under such conditions as working level is A6, relative humidity ≤ 85%, altitude less than 2000m, non-corrosive medium.
| crane travelling mechanism | travelling speed(m/min) | 20 | 30 | |
| speed ratio | 58.95 | 39.42 | ||
| motor | type | cone squirrel-cage | ||
| power(kw) | 0.8×2 & 1.5×2 | |||
| rotational speed (r/min) | 1380 | |||
| lifting mechanism (electric hoist)& electric hoist travelling mechanism | model of electric hoist | YHⅡ model | ||
| lifting speed(m/min) | 8, 7 | |||
| lifting height(m) | 9, 12, 15, 18, 20 | |||
| travelling speed(m/min) | 20 | |||
| motor | cone squirrel-cage model | |||
| working system | intermediate Jc=25% | |||
| electric current | 380V, 50Hz, three-phase | |||
| wheel diameter | φ270, φ400 | |||
| width of trail | 37 - 70 | |||
If you need a custom crane or need a complete crane solution or if you have any other questions, you can submit a message to us via the form below. We usually get in touch with you within 24 hours.
